GitHub - sebadur/sranger-mk2: DSP Signal Ranger Mk2,3(Pro) for GXSM with trigger pulse for vector mode added.

sebadur / sranger-mk2 Public

Notifications You must be signed in to change notification settings
Fork 0
Star 0

DSP Signal Ranger Mk2,3(Pro) for GXSM with trigger pulse for vector mode added.

Notifications

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
.idea		.idea
Analog_16_support		Analog_16_support
SR2_PrepareFlashForSR2_Analog_810		SR2_PrepareFlashForSR2_Analog_810
python_scripts		python_scripts
AUTHORS		AUTHORS
Analog810Driver.h		Analog810Driver.h
COPYING		COPYING
FB_spm.c		FB_spm.c
FB_spm.h		FB_spm.h
FB_spm_CoolRunner_puls.c		FB_spm_CoolRunner_puls.c
FB_spm_analog.h		FB_spm_analog.h
FB_spm_areascan.c		FB_spm_areascan.c
FB_spm_autoapproach.c		FB_spm_autoapproach.c
FB_spm_dataexchange.h		FB_spm_dataexchange.h
FB_spm_dsoszi.c		FB_spm_dsoszi.c
FB_spm_lnk.cmd		FB_spm_lnk.cmd
FB_spm_lnk_A16.cmd		FB_spm_lnk_A16.cmd
FB_spm_magic.asm		FB_spm_magic.asm
FB_spm_offsetmove.c		FB_spm_offsetmove.c
FB_spm_probe.c		FB_spm_probe.c
FB_spm_statemaschine.c		FB_spm_statemaschine.c
FB_spm_statemaschine.h		FB_spm_statemaschine.h
FB_spmcontrol_MK2_A16.out		FB_spmcontrol_MK2_A16.out
FB_spmcontrol_MK2_A810.out		FB_spmcontrol_MK2_A810.out
Makefile		Makefile
Makefile-A16		Makefile-A16
README		README
ReadWrite_GPIO.asm		ReadWrite_GPIO.asm
ReadWrite_GPIO.h		ReadWrite_GPIO.h
SR2Kernel_HostDownload.out		SR2Kernel_HostDownload.out
SR2Kernel_PowerUp.out		SR2Kernel_PowerUp.out
SignalRangerMK2.mem		SignalRangerMK2.mem
counter_accu.asm		counter_accu.asm
dataprocess.c		dataprocess.c
dataprocess.h		dataprocess.h
dsp_clock.asm		dsp_clock.asm
feedback.asm		feedback.asm
mul32.asm		mul32.asm
mul32.h		mul32.h
record.asm		record.asm
rts55.lib		rts55.lib
spm_log.asm		spm_log.asm
sr2_analog810driver.lib		sr2_analog810driver.lib
vectors.asm		vectors.asm
vectors_A16.asm		vectors_A16.asm

Repository files navigation

*** DSP Signal Ranger Mk2/Mk3(Pro) for GXSM

This software is configured to perform a vector mode (LM) pulse with option to await
a trigger pulse on GPIO-0. For that enable "TP"-flag where the trigger needs to be.
Care that output-mask of the pin is 0.
Forked from https://sourceforge.net/p/sranger/svn/HEAD/tree/trunk/SRanger/
Licensed under GNU GPL Version 2, June 1991


** install the TI "cgtools-c5500" in /opt/TI/cgtools-c55 -- tested with:
TMS320C55x Code Generation Tools Release Version 2.56

** to build the DSP binary for the MK2-A810 (strongly recommended for all SPM
application with feedback loop) type:

make clean
make

** to build a DSP binary for the MK2-Analog16 (AIC24) you can build a
binary as well, this is less tested and not main stream:

make clean
make -f Makefile-A16


** take the generated COFF file FB_spmcontrol.out (or ..-A16.out) to a
MS Win based system and use the by SoftdB provided minidebugger to
load (reflash) the DSP code. Depending on the previous FPGA
configuration, you may need to have the correspondinf FPGA (.rbt) file
as well.

SR2_Analog_810_V200.rbt

or

SR2_Analog_16.rbt

** power cycle the DSP and plug into your Linux system.

** make sure the kernel module is in place and device permissions are
configured via udev or manually via chmod for every one to read/write.

** use "dmesg" command to check module messages/status