chore: update running a node docs for testnet

docs/guides/docs/running-a-node/index.mdx

@@ -8,8 +8,6 @@ parent:
 
 # Running a Node
 
-> **Note:** This guide has not yet been updated for the new `testnet` network.
-
 This guide is designed to swiftly introduce you to the process of running a local node for the Fuel blockchain.
 
 ## What is a Node?

docs/guides/docs/running-a-node/running-a-local-node.mdx

@@ -8,8 +8,6 @@ parent:
 
 # Running a local Fuel node
 
-> **Note:** This guide has not yet been updated for the new `testnet` network.
-
 In addition to deploying and testing on the Fuel Testnet, you can also run a local Fuel Node.
 
 There are two types of Fuel networks that can be run:
@@ -21,10 +19,10 @@ There are two types of Fuel networks that can be run:
 
 An in-memory node does not persist the blockchain state anywhere, it is only stored in memory as long as the node is active and running.
 
-To spin-up a local in-memory Fuel node, run the following command:
+To spin-up a local in-memory Fuel node download or copy the local snapshot from [here](https://github.com/FuelLabs/chain-configuration/tree/master/local), then run the following command:
 
 ```sh
-fuel-core run --db-type in-memory --debug
+fuel-core run --db-type in-memory --debug --snapshot ./your/path/to/chain_config_folder
 ```
 
 To deploy a contract to the local node, run the following command:
@@ -33,32 +31,59 @@ To deploy a contract to the local node, run the following command:
 forc deploy <signing-key> --node-url 127.0.0.1:4000/graphql
 ```
 
-Or to deploy without using a signing key:
+Or to deploy with the default signer that is pre-funded by fuel-core:
 
 ```sh
-forc deploy --unsigned --node-url 127.0.0.1:4000/graphql
+forc deploy --default-signer --node-url 127.0.0.1:4000/graphql
 ```
 
 ## Chain Configuration
 
-To modify the initial state of the chain, you must configure a `chainConfig.json` file.
+To modify the initial state of the chain, you must configure the `state_config.json` file in your chain configuration folder.
 Here is an example of what that looks like using version {props.fuelCoreVersion} of `fuel-core`:
 
+<ConditionalContent versionSet={props.versionSet} showForVersions={["default", "nightly"]}>
+  Here is the [specific configuration](https://github.com/FuelLabs/fuel-core/tree/9fddeccb4d112c148f6793bc3d21131a13778a25/bin/fuel-core/chainspec/testnet)
+
+  `chain_config.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/chain_config.json"
+  />
+
+  `metadata.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/metadata.json"
+  />
+
+  `state_config.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/state_config.json"
+  />
+
+  `state_transition_bytecode.wasm`
+
+  Which is too large to display on this page, but you can find it [here](https://github.com/FuelLabs/fuel-core/blob/9fddeccb4d112c148f6793bc3d21131a13778a25/bin/fuel-core/chainspec/testnet/state_transition_bytecode.wasm)
+
+</ConditionalContent>
+
 To start the node with a custom configuration, you can use the command below:
 
 ```sh
-fuel-core run --chain ./chainConfig.json --db-type in-memory --debug
+fuel-core run --snapshot ./your/path/to/chain_config_folder --db-type in-memory --debug
 ```
 
-To find an example chain configuration file for a specific `fuel-core` version, refer to the [`fuel-core`](https://github.com/FuelLabs/fuel-core/tree/v0.22.0/deployment/scripts/chainspec) repo.
+To find an example chain configuration folder for a specific `fuel-core` version, refer to the [`fuel-core`](https://github.com/FuelLabs/fuel-core/tree/9fddeccb4d112c148f6793bc3d21131a13778a25/bin/fuel-core/chainspec/testnet) repo.
 
 ### Funding a wallet locally
 
-You can edit the `coins` array inside the `inital_state` object to modify the initial assets owned by a given address.
+You can edit the `coins` array inside `state_config.json` to modify the initial assets owned by a given address.
 
 The `owner` address must be a `B256` type address (begins with `0x`) instead of a `Bech32` type (begins with `fuel`).
 
-The `amount` is a hex value. In this example, the value translates to `1,125,899.9 ETH`.
+The `amount` is a numerical value. In this example, the value translates to `11,152,921,504 ETH`.
 
 ## Local node (with state persistence)
 
@@ -68,7 +93,7 @@ To run a local node with persistence a chain configuration file is required.
 To start the node, run the following command:
 
 ```sh
-fuel-core run --ip 127.0.0.1 --port 4000 --chain ./chainConfig.json --db-path ./.fueldb --debug
+fuel-core run --ip 127.0.0.1 --port 4000 --snapshot ./your/path/to/chain_config_folder --db-path ./.fueldb --debug
 ```
 
 ## Connecting to the local node from a browser wallet

docs/guides/docs/running-a-node/running-a-testnet-node.mdx

@@ -8,28 +8,8 @@ parent:
 
 # Running a local Fuel node connected to Testnet using P2P
 
-> **Note:** This guide has not yet been updated for the new `testnet` network.
-
-{/*install_help:example:start*/}
-> P2P syncing is currently disabled for the Beta-5 network. Please check this page or the [Forum](https://forum.fuel.network) for updates.
-{/*install_help:example:end*/}
-
 ## Installation
 
-<TextImport
-  file="../installation/index.mdx"
-  comment="install_rust"
-  commentType="{/*"
-/>
-
-<CodeImport
-  file="../installation/index.mdx"
-  comment="install_rust_command"
-  commentType="{/*"
-  lang="sh"
-  trim="true"
-/>
-
 <TextImport
   file="../installation/index.mdx"
   comment="install_fuelup"
@@ -44,6 +24,15 @@ parent:
   trim="true"
 />
 
+To run a `testnet` node, you will need to install the `testnet` toolchain.
+
+You can do this by running the commands below.
+
+```sh
+fuelup toolchain install testnet
+fuelup default testnet
+```
+
 <TextImport
   file="../counter-dapp/building-a-smart-contract.mdx"
   comment="install_help"
@@ -111,7 +100,34 @@ Make sure you save this somewhere safe so you don't need to generate a new key p
 
 ## Chain Configuration
 
-To run a local node with persistence, you must configure a `chainConfig.json` file.
+To run a local node with persistence, you must have a folder with the following chain configuration files:
+
+<ConditionalContent versionSet={props.versionSet} showForVersions={["default", "nightly"]}>
+  Here is the [specific configuration](https://github.com/FuelLabs/fuel-core/tree/9fddeccb4d112c148f6793bc3d21131a13778a25/bin/fuel-core/chainspec/testnet)
+
+  `chain_config.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/chain_config.json"
+  />
+
+  `metadata.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/metadata.json"
+  />
+
+  `state_config.json`
+
+  <CodeImport
+    file="../../../fuel-core/bin/fuel-core/chainspec/testnet/state_config.json"
+  />
+
+  `state_transition_bytecode.wasm`
+
+  Which is too large to display on this page, but you can find it [here](https://github.com/FuelLabs/fuel-core/tree/9fddeccb4d112c148f6793bc3d21131a13778a25/bin/fuel-core/chainspec/testnet/state_transition_bytecode.wasm)
+
+</ConditionalContent>
 
 ## Running a Local Node
 
@@ -125,17 +141,17 @@ Finally to put everything together to start the node, run the following command:
 fuel-core run \
 --service-name {ANY_SERVICE_NAME} \
 --keypair {P2P_SECRET} \
---relayer {ETH_RPC_ENDPOINT}\
+--relayer {ETH_RPC_ENDPOINT} \
 --ip 0.0.0.0 --port 4000 --peering-port 30333 \
---db-path  ~/.fuel_beta5 \
---chain ./chainConfig.json \
+--db-path  ~/.testnet \
+--snapshot ./your/path/to/chain_config_folder \
 --utxo-validation --poa-instant false --enable-p2p \
 --min-gas-price 1 --max-block-size 18874368  --max-transmit-size 18874368 \
---reserved-nodes /dns4/p2p-beta-5.fuel.network/tcp/30333/p2p/16Uiu2HAmSMqLSibvGCvg8EFLrpnmrXw1GZ2ADX3U2c9ttQSvFtZX,/dns4/p2p-beta-5.fuel.network/tcp/30334/p2p/16Uiu2HAmVUHZ3Yimoh4fBbFqAb3AC4QR1cyo8bUF4qyi8eiUjpVP \
+--reserved-nodes /dns4/p2p-devnet.fuel.network/tcp/30333/p2p/16Uiu2HAm6pmJUedRFjennk4A8yWL6zCApHCuykzRRroqMjjxZ8o6,/dns4/p2p-devnet.fuel.network/tcp/30334/p2p/16Uiu2HAm8dBwTRzqazCMqQDdR8thMa7BKiW4ep2B4DoQQp6Qhyfd  \
 --sync-header-batch-size 100 \
 --enable-relayer \
---relayer-v2-listening-contracts 0x557c5cE22F877d975C2cB13D0a961a182d740fD5 \
---relayer-da-deploy-height 4867877 \
+--relayer-v2-listening-contracts 0x01855B78C1f8868DE70e84507ec735983bf262dA \
+--relayer-da-deploy-height 5827607 \
 --relayer-log-page-size 2000
 ```
 

spell-check-custom-words.txt

@@ -110,4 +110,5 @@ onboarding
 Fuelet
 Metamask
 Devnet
-devnet
+devnet
+pre