update md and photos files

_build/html/_sources/index.md

@@ -2,7 +2,7 @@
 
 ## Overview 
 
-This documentation provides a guide to assemble and test a color sensor package with a wireless charging port that could be implemented to the OT-2 liquid handling robot. 
+This documentation provides a guide to assemble and test a color sensor package with a dual wireless charging port that could be implemented to the OT-2 liquid handling robot. 
 
    <div style="text-align: center; margin-top: 10px;">
       <img src="_static/images/Wireless-color-sensor-in-OT-2.png" width="500">
@@ -277,7 +277,7 @@ Print the sensor package and the charging port enclosure with light-color materi
        Never connect your battery to PicoSHIM with wrong polarity!
      :::
 
-      Connect the battery to the LipoSHIM with the JST connector. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW. 
+      Connect the battery to the LipoSHIM with <span class="color-blue">the JST connector</span>. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW. 
 
      <div style="text-align: center; margin-top: 10px;">
        <img src="_static/images/Battery-Picow-1.png" style="width: 500px;">
@@ -415,7 +415,7 @@ Print the sensor package and the charging port enclosure with light-color materi
      <br>   
 
 :::{Note}
- If you would like to disassemble the sensor or sensor stand after assembly, use tweezers(or a similar tool) to gently pry up one side of the sensor, then the other, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.
+ If you would like to disassemble the sensor or sensor stand after assembly, use a tweezer(or a similar tool) to gently pry up one side of the sensor, then the other side, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.
 :::
 
 
@@ -435,8 +435,8 @@ Print the sensor package and the charging port enclosure with light-color materi
      Aligning the sliding tips on both ends of the backboard to the sliding slots on the main enclosure, adjusting all the wires within the enclosure, carefully assemble the backboard to the main enclosure. 
 
      <div style="text-align: center; margin-top: 10px; display: flex; justify-content: center;">
-      <img src="_static/images/backboard-to-main-2.png" style="width: 400px; margin-right: 10px;">
-      <img src="_static/images/backboard-to-main-1.png" style="width: 400px;">
+      <img src="_static/images/backboard-to-main-1.png" style="width: 400px; margin-right: 10px;">
+      <img src="_static/images/backboard-to-main-2.png" style="width: 400px;">
      </div>
 
      <br>   

_build/html/index.html

@@ -320,7 +320,7 @@ <h2> Contents </h2>
 <h1>Getting started guide for wireless color sensor<a class="headerlink" href="#getting-started-guide-for-wireless-color-sensor" title="Link to this heading">#</a></h1>
 <section id="overview">
 <h2>Overview<a class="headerlink" href="#overview" title="Link to this heading">#</a></h2>
-<p>This documentation provides a guide to assemble and test a color sensor package with a wireless charging port that could be implemented to the OT-2 liquid handling robot.</p>
+<p>This documentation provides a guide to assemble and test a color sensor package with a dual wireless charging port that could be implemented to the OT-2 liquid handling robot.</p>
    <div style="text-align: center; margin-top: 10px;">
       <img src="_static/images/Wireless-color-sensor-in-OT-2.png" width="500">
   </div>
@@ -568,7 +568,7 @@ <h4>Sensor Package assembling:<a class="headerlink" href="#sensor-package-assemb
 <p class="admonition-title">Warning</p>
 <p>Never connect your battery to PicoSHIM with wrong polarity!</p>
 </div>
-<p>Connect the battery to the LipoSHIM with the JST connector. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW.</p>
+<p>Connect the battery to the LipoSHIM with <span class="color-blue">the JST connector</span>. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW.</p>
 <div style="text-align: center; margin-top: 10px;">
   <img src="_static/images/Battery-Picow-1.png" style="width: 500px;">
 </div>   
@@ -666,7 +666,7 @@ <h4>Sensor Package assembling:<a class="headerlink" href="#sensor-package-assemb
 </ol>
 <div class="admonition note">
 <p class="admonition-title">Note</p>
-<p>If you would like to disassemble the sensor or sensor stand after assembly, use tweezers(or a similar tool) to gently pry up one side of the sensor, then the other, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.</p>
+<p>If you would like to disassemble the sensor or sensor stand after assembly, use a tweezer(or a similar tool) to gently pry up one side of the sensor, then the other side, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.</p>
 </div>
 <ol class="arabic" start="8">
 <li><p><strong>Secure the receiver:</strong></p>
@@ -679,8 +679,8 @@ <h4>Sensor Package assembling:<a class="headerlink" href="#sensor-package-assemb
 <li><p><strong>Final Assembly of the Backboard and Main Enclosure：</strong></p>
 <p>Aligning the sliding tips on both ends of the backboard to the sliding slots on the main enclosure, adjusting all the wires within the enclosure, carefully assemble the backboard to the main enclosure.</p>
 <div style="text-align: center; margin-top: 10px; display: flex; justify-content: center;">
- <img src="_static/images/backboard-to-main-2.png" style="width: 400px; margin-right: 10px;">
- <img src="_static/images/backboard-to-main-1.png" style="width: 400px;">
+ <img src="_static/images/backboard-to-main-1.png" style="width: 400px; margin-right: 10px;">
+ <img src="_static/images/backboard-to-main-2.png" style="width: 400px;">
 </div>
 <br>   
 <p><strong>🎉 Congrats, your wireless color sensor is ready to go!</strong></p>

index.md

@@ -2,7 +2,7 @@
 
 ## Overview 
 
-This documentation provides a guide to assemble and test a color sensor package with a wireless charging port that could be implemented to the OT-2 liquid handling robot. 
+This documentation provides a guide to assemble and test a color sensor package with a dual wireless charging port that could be implemented to the OT-2 liquid handling robot. 
 
    <div style="text-align: center; margin-top: 10px;">
       <img src="_static/images/Wireless-color-sensor-in-OT-2.png" width="500">
@@ -277,7 +277,7 @@ Print the sensor package and the charging port enclosure with light-color materi
        Never connect your battery to PicoSHIM with wrong polarity!
      :::
 
-      Connect the battery to the LipoSHIM with the JST connector. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW. 
+      Connect the battery to the LipoSHIM with <span class="color-blue">the JST connector</span>. Adjust the wires of the battery to through <span class="color-red">a row of pins</span> on the PicoW. 
 
      <div style="text-align: center; margin-top: 10px;">
        <img src="_static/images/Battery-Picow-1.png" style="width: 500px;">
@@ -415,7 +415,7 @@ Print the sensor package and the charging port enclosure with light-color materi
      <br>   
 
 :::{Note}
- If you would like to disassemble the sensor or sensor stand after assembly, use tweezers(or a similar tool) to gently pry up one side of the sensor, then the other, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.
+ If you would like to disassemble the sensor or sensor stand after assembly, use a tweezer(or a similar tool) to gently pry up one side of the sensor, then the other side, gradually lifting it out from four spikes. For the sensor stand, use a thin tool to push it up from the bottom. Be careful not to touch the central electronic components of the sensor during this process.
 :::
 
 
@@ -435,8 +435,8 @@ Print the sensor package and the charging port enclosure with light-color materi
      Aligning the sliding tips on both ends of the backboard to the sliding slots on the main enclosure, adjusting all the wires within the enclosure, carefully assemble the backboard to the main enclosure. 
 
      <div style="text-align: center; margin-top: 10px; display: flex; justify-content: center;">
-      <img src="_static/images/backboard-to-main-2.png" style="width: 400px; margin-right: 10px;">
-      <img src="_static/images/backboard-to-main-1.png" style="width: 400px;">
+      <img src="_static/images/backboard-to-main-1.png" style="width: 400px; margin-right: 10px;">
+      <img src="_static/images/backboard-to-main-2.png" style="width: 400px;">
      </div>
 
      <br>