These pieces make up the four corners of Sawppy's main equipment bay. They are connected to each other via aluminum extrusion beams. Each corner has four holes for M3 thread heat-set inserts, as preparation for future sensors installation.
CAD source Body Corner
3D Printing STL File: Body Corner.stl
3D Printing Notes
- We will need 4 of these, one for each corner of rover equipment bay.
- Lay the shape on print bed as shown in picture below for best strength from print layer orientation.
- Example print durations:
- Fast PLA rough draft: 4 hours each * 4 units = 16 hours total.
- Slow PETG final draft: 6.5 hours each * 4 units = 26 hours total.
Post-Processing:
No special processing required.